01.12.2025. 
Safety4EU Newsletter No. 3 (December 2025) Now Published

We are pleased to announce the publication of Safety4EU Newsletter No. 3 (December 2025). 
The full newsletter is available at the following link. 

25.09.2025. 
Safety4EU Dissemination 
at the SEMSIE 2025 Conference in Sokobanja

As part of the International Conference “Man and Working Environment” – SEMSIE 2025 Conference, held on September 25–26, Prof. Milan Protić presented key activities and results of the Safety4EU project. 
The presentation placed particular emphasis on the application of virtual laboratories based on dynamic process simulation software for simulating and testing different process safety scenarios. Through practical examples, participants were introduced to the ways in which virtual labs contribute to modernizing education, professional training, and preparedness for critical safety events in process industries. 
A dedicated session within the conference focused on several important aspects of the Safety4EU project, including an overview of the project objectives and its main pillars, the growing role of IT technologies in workplace and process safety, and the integration of digital tools such as Python, Maple, and AVEVA Process Simulation into academic curricula. The session also included a demonstration of virtual laboratories implemented through the AVEVA software suite. 
The conference provided an important opportunity for the exchange of knowledge and experiences with experts and researchers in the fields of occupational and process safety, while also contributing to the wider dissemination and visibility of the Safety4EU project community. 

13.06.2025. 
Final Lecture Session and Certificate Award Ceremony 
within the Safety4EU Module 

The concluding lecture of “Hazards and Consequences in Industry” was delivered on June 13, 2025, by Prof. Milan Protić. This final session marked the end of the module, summarizing key topics and reinforcing the main concepts covered throughout the course. 
On the same day, the Safety4EU project marked a major achievement with the official certificate award ceremony for the second generation of participants. The event was held at the Faculty of Occupational Safety, University of Niš, where certificates were presented to students who successfully fulfilled all course requirements and demonstrated consistent engagement and dedication during the module. 

10.06.2025. 
Lecture on Hazards and Consequences in Industry (part III) and Students Final Assessments and Presentations 

The third part of the lecture “Hazards and Consequences in Industry,” delivered by Prof. Milan Protić, focused on applying theoretical concepts through practical, worked examples supported by computational tools. Students engaged in problem-solving activities using software such as Python (via Jupyter Notebook) and Mathcad, which helped them strengthen their understanding of hazard analysis and modeling techniques in industrial safety contexts. On the same day, 10 June 2025, students completed their final assessments, which covered the key topics addressed during the course. Alongside the written evaluations, they also presented their seminar papers, demonstrating both their comprehension of the material and their ability to apply acquired knowledge to relevant problems in the field of industrial safety. 

09.06.2025. 
Lecture and Laboratory Visit on Hazards and Consequences 
in Industry (Part 11) 

On June 9, 2025, Prof. Milan Protić continued the second part of the lecture “Hazards and Consequences in Industry,” focusing on advanced topics such as combustion fundamentals and the mechanisms of fire and explosion development. Students examined how these phenomena are analyzed and interpreted within the field of process safety.

06.06.2025. 
Lecture: Hazards and Consequences in Industry (Part 1) 

The first part of the lecture “Hazards and Consequences in the Industry” was delivered by Prof. Milan Protić on June 6, 2025. The session introduced the basic concepts of industrial hazards, with particular attention given to physical hazards such as fires and explosions. Students were also familiarized with fundamental principles of thermodynamics, thermochemistry, heat transfer, and fluid dynamics, providing an essential theoretical basis for further studies in process and industrial safety. 
Later that day, a group of students visited the Fire Protection Laboratory at the Faculty of Occupational Safety, University of Niš. During the visit, students actively participated in laboratory experiments related to the testing of fire characteristics of different materials. Through this practical experience, they gained valuable insight into material behavior under fire conditions, as well as an introduction to standard fire testing methods and laboratory procedures used in the field of fire protection and safety engineering. 

06.06.2025. 
Lecture: Hazards and Consequences in Industry (Part 1) 

The first part of the lecture “Hazards and Consequences in the Industry” was delivered by Prof. Milan Protić on June 6, 2025. The session introduced the basic concepts of industrial hazards, with particular attention given to physical hazards such as fires and explosions. Students were also familiarized with fundamental principles of thermodynamics, thermochemistry, heat transfer, and fluid dynamics, providing an essential theoretical basis for further studies in process and industrial safety. 
Later that day, a group of students visited the Fire Protection Laboratory at the Faculty of Occupational Safety, University of Niš. During the visit, students actively participated in laboratory experiments related to the testing of fire characteristics of different materials. Through this practical experience, they gained valuable insight into material behavior under fire conditions, as well as an introduction to standard fire testing methods and laboratory procedures used in the field of fire protection and safety engineering. 

04.06.2025. 
Lecture: Process Safety – Learning from Case Histories

On June 4, 2025, prof. Milan Protić delivered the lecture “Process Safety – Learning from Case Histories.” The session emphasized the importance of analyzing previous accidents and industrial incidents as a way to strengthen process safety practices. Using selected case studies, the lecture demonstrated how effective safety management systems can support hazard identification and risk reduction, while also addressing the impact of human factors such as insufficient communication, lack of training, and complacency in the occurrence of unsafe situations. Special attention was given to the role of continuous learning and experience-sharing in preventing future incidents and enhancing overall workplace safety.

03.06.2025. 
Lecture: Sources and Dispersion Models – Part III

The final part of the lecture “Sources and Dispersion Models” was delivered by Prof. Milan Protić on June 3, 2025. This session focused on the practical application of source and dispersion modeling approaches in process and industrial safety management. Particular attention was given to the role of these models in identifying potential hazards, assessing risks, and supporting emergency response planning in the event of industrial accidents.

29.05.2025. 
Lecture: Sources and Dispersion Models – Part II                   

The lecture “Sources and Dispersion Models” continued on April 29, 2025 with a session delivered by Prof. Milan Protić. In addition to oil and chemical releases, the lecture examined various types of industrial accidents, including incidents caused by chemical reactions, transportation-related accidents, and environmental events involving toxic substance emissions. The session emphasized the significance of both retrospective analyses of past incidents and the prediction of future risks in strengthening process safety systems. Particular focus was placed on the causes and consequences of such events, as well as on the implementation of preventive measures aimed at minimizing industrial and environmental risks.

23.05.2025. 
Introduction to Machine Learning in Workplace 
and Process Safety – Part II                          

The second part of the lecture “Introduction to Machine Learning in Workplace and Process Safety” was delivered by Prof. Milan Protić on 23 May 2025.
 This lecture focused on the practical application of machine learning models for addressing workplace and process safety challenges. Through the use of Python, students worked with real datasets to implement and test models, gaining valuable hands-on experience in applying machine learning techniques to safety-related problems. 

19.05.2025. 
Lecture: Introduction to Machine Learning in Workplace and Process Safety (Part I)                              

On 19 May 2025, the first part of the lecture “Introduction to Machine Learning in Workplace and Process Safety” was held by Prof. Milan Gocić. The lecture offered a general overview of machine learning and its relevance to workplace and process safety applications. Students were introduced to commonly used machine learning toolkits and publicly available datasets, along with foundational theoretical concepts that support practical implementation in this field.

15.05.2025. 
Lecture: Data Analysis, Programming & Interpretation (Part III)

The concluding lecture of the course “Data Analysis, Programming & Interpretation” was delivered on 15 May 2025 by Prof. Milan Gocić. 
This final part of the course addressed more advanced topics, including the creation of graphical outputs, the basics of user interface development, and the use of a wide range of Python libraries for data analysis and visualization. Students were also introduced to fundamental concepts of MySQL databases, providing a well-rounded introduction to applied scientific programming and data management skills. 

14.05.2025. 
Lecture: Data Analysis, Programming & Interpretation (Part II)

On 14 May 2025, the lecture “Data Analysis, Programming & Interpretation” continued as a follow-up to the previous session, also by Prof. Milan Gocić. 
This part of the course was dedicated to developing practical programming skills, with a focus on core concepts such as working with formulas, control structures (loops), data structures like lists, user input handling, and basic error management techniques. 
In addition, students enhanced their computational thinking and problem-solving abilities through hands-on exercises using Python-based tools, applying theoretical knowledge to solve structured programming tasks and real-world oriented problems. 

08.05.2025. 
Lecture: Data Analysis, Programming & Interpretation (Part I)

On 8 May 2025, Prof. Milan Gocić delivered the first part of the lecture “Data Analysis, Programming & Interpretation.” The session introduced students to scientific programming skills designed for advanced coursework, with a focus on Python, Jupyter Notebook, and MathCAD. It also covered key concepts including object-oriented programming, algorithm analysis, basic data structures, and recursion.

07.05.2025. 
Lecture: Online Workplace Monitoring for Harmful Substances

A lecture titled “Online Workplace Monitoring for Harmful Substances, Especially Carcinogenic” was delivered by Dr. Viša Tasić on 7 May, 2025. 
The lecture addressed the serious health risks associated with occupational exposure to carcinogenic substances within the EU and presented the EU roadmap on carcinogens, which focuses on identifying and reducing these workplace hazards. It also highlighted the importance of real-time monitoring, noting that its wider implementation is often limited by high costs and technical constraints. 
Students were introduced to IoT-based monitoring systems that use low-cost sensors and affordable hardware platforms such as NodeMCU, Arduino, and Raspberry Pi for real-time tracking of workplace pollutants. The lecture further covered system architecture, working principles, calibration, data acquisition, and visualization, with particular emphasis on ensuring data quality in low-cost sensing applications. 

30.04.2025. 
Lecture on Legislative Framework for Workplace and Process Safety – Part II 

Expanding on the topics introduced in the previous session, the lecture series continued on 30 April 2025 with a lecture on “Legislative Framework for Workplace and Process Safety” delivered by Prof. Srđan Glišović. This session provided a deeper insight into the EU framework for workplace and process safety, with particular emphasis on regulatory requirements, risk management practices, and their practical implementation across various industrial sectors.

29.04.2025. 
Lecture: Sources and Dispersion Models (Part I)

The introductory part of the lecture “Sources and Dispersion Models” was held by Prof. Miomir Raos on April 29, 2025. The session explored the application of modeling tools in process safety for the prediction and management of hazardous substance releases. Students were introduced to source models used to estimate the rate and duration of chemical and gas leaks during industrial accidents, as well as dispersion models that simulate the movement and spread of released substances in the environment. The lecture also covered consequence models, which are used to evaluate the potential impacts of such incidents on human health and the environment.

25.04.2025. 
Lecture: Psychosocial Risks at the Workplace – Part II

The second part of the lecture “Psychosocial Risks at the Workplace,” was held on 25 April, 2025 by Prof. Snežana Živković. The lecture further examined the key factors contributing to psychosocial risks, such as the work environment, social support systems, and individual characteristics. Students also gained insight into methods for identifying and assessing these risks, along with strategies for their prevention and reduction at both individual and organizational levels. In addition, it highlighted best practices for fostering mental health and well-being in the workplace. 

24.04.2025. 
Lecture: Psychosocial Risks at the Workplace (Part I) 

The first part of the lecture titled “Psychosocial Risks at the Workplace” was delivered on 24 April, 2025 by Prof. Snežana Živković. The session introduced students to the concept of psychosocial risks, highlighting the social and psychological factors that may influence workers’ physical and mental health. It also provided definitions and practical examples of such risks, along with an overview of their impact on overall well-being in the work environment.

23.04.2025. 
Lecture: Quantitative Risk Assessment (Part II) 

On 23 April, 2025, the continuation of the lecture titled “Quantitative Risk Assessment” was held by Prof. Ana Vukadinović. The session focused on advanced approaches to risk analysis and decision-making. It introduced quantitative risk analysis and the use of probability theory to assess uncertainty in complex systems. 
Particular emphasis was placed on the Bow-Tie method for mapping the causes and consequences of hazardous events, as well as the Monte Carlo simulation technique for modeling risk scenarios through repeated random sampling. The Delphi technique was also presented as a structured, expert-based approach for achieving consensus in risk assessment and forecasting.

15.04.2025. 
Lecture: Ergonomic Risks (Part II)

Prof. Evica Jovanović continued the topic in the second part of the lecture “Ergonomic Risks” on April 15, 2025. This session explored different types of ergonomic risks in greater detail and highlighted their practical implications in various working environments. Special attention was given to real-world case studies and examples of successful ergonomic risk management practices across different industries.

14.04.2025. 
Lecture: Ergonomic Risks (Part I)

The lecture titled “Ergonomic Risks” (first part) was delivered by Prof. Evica Jovanović on 14 April 2025. The session introduced students to the EU Strategic Framework on Health and Safety at Work (2021–2027), with particular attention to ergonomic and psychosocial risks. It also provided an overview of ergonomic hazards and their effects on workers’ health and safety, especially those arising from workstation design, repetitive movements, and the use of inadequately designed tools and equipment. 

10.04.2025. 
Lecture: Quantitative Risk Assessment (Part I)

The first part of the lecture titled “Quantitative Risk Assessment” was delivered by Prof. Evica Jovanović on 10 April 2025. The lecture introduced fundamental concepts in risk management, including the definitions of hazard, risk, and danger, as well as the basic principles of managing risk. It further explained the risk management framework, covering the establishment of context, risk identification, risk analysis, risk evaluation, and risk treatment. 
Special focus was placed on key risk assessment tools, such as the risk matrix, along with approaches for ongoing risk monitoring. The session also presented more advanced methods, including event tree analysis, to help understand potential outcomes and support improved decision-making in safety management. 

09.04.2025. 
Lecture: EU Legislative Regarding Workplace and Process Safety – Part I

On 9 April 2025, Prof. Dejan Vasović delivered the first part of the lecture titled “European Union Legislation Regarding Workplace and Process Safety”. This session introduced students to the contemporary EU regulatory framework aimed at ensuring safe and healthy working conditions. 
The lecture highlighted the interconnection between occupational safety, environmental protection, and industrial process activities, with a special focus on industrial emissions management and accident prevention. It aimed to strengthen students’ knowledge and begin developing practical skills in process safety related to IPPC/IED operators and Seveso III installations. 

03.04.2025. 
Lecture on Economic Aspects of Workplace and Process Safety”

On 3 April 2025, Prof. Tamara Rađenović delivered a lecture titled “Economic Aspects of Workplace and Process Safety.” The session focused on the considerable economic impact of occupational injuries, work-related illnesses, and fatalities, affecting individuals, employers, public institutions, and society as a whole. Drawing on estimates from the European Agency for Safety and Health at Work, she highlighted that these costs represent a significant portion of global GDP, varying according to industrial structures, regulatory environments, and prevention strategies. 
The lecture also introduced students to key cost categories, such as productivity losses, healthcare and insurance expenses, administrative costs, and reduced quality of life. In addition, it underlined the economic benefits of implementing effective process safety management systems and discussed various incentive mechanisms that promote investment in workplace risk prevention.. 

02.04.2025. 
Introductory Lecture on European Integration

On 2 April 2025, the Safety4EU module was officially launched at the Faculty of Occupational Safety, University of Niš, marking the start of lectures for the second cohort of students enrolled in the programme. 
The opening lecture, titled “Introduction to European Integration,” was delivered by Prof. Tamara Rađenović. It offered an interdisciplinary perspective on the European integration process, covering its social, political, economic, and legal aspects. The lecture also presented the main EU institutions, key legislative frameworks, and the enlargement process, emphasizing their organization and future prospects.

15.03.2025. 
AVEVA Strengthens Faculty of Occupational Safety Through Jean Monnet Module

We are pleased to announce an enhanced academic collaboration with AVEVA, established in 2025. Through this initiative, the Faculty of Occupational Safety has been granted access to the AVEVA Process Simulation Full Functionality Bundle (ALS), a leading industrial tool for process modeling and optimization, along with 20 concurrent user licenses. This partnership enables students and researchers to work with globally recognized engineering software and further strengthens the integration of advanced simulation tools into teaching. Supported by the Jean Monnet Module, the Faculty continues to develop modern skills and competencies needed for contemporary safety and engineering challenges in Europe. We thank AVEVA for their valuable contribution to academic excellence and professional development. 

24.12.2024. 
Call for Applications: 
Second Generation of Students for the Safety4EU Jean Monnet Module 

The Faculty of Occupational Safety in Niš is announcing an open call for applications for admission to the Jean Monnet Module “Safety at Work and in Technological Processes in Next-Generation Europe (Safety4EU)”. The module is designed to provide students with advanced knowledge and understanding of contemporary approaches to safety in work and technological environments within the European context. For more information and application details, please refer to https://www.ni.ac.rs/novosti-i-dogadjaji/stipendije-i-konkursi/erasmus/konkurs-za-upis-polaznika-na-zan-mone-modul-bezbednost-na-radu-i-u-tehnoloskim-procesima-u-evropi-sledece-generacije-safety4eu-202412241318